GO LED PROFILE SET

The PIXLIP GO LIGHTBOX offers several advantages for mobile presentations at trade fairs, events, or in retail:

Thanks to the tool-free plug-in system, the illuminated wall can be assembled and disassembled in just a few minutes. The lightweight, sturdy ABS plastic profiles ensure easy handling and high mobility. Integrated high-performance LEDs illuminate the graphic evenly from both sides and ensure maximum attention.

Thanks to the modular system, multiple lightboxes can be combined flexibly and expanded at any time. The B1-certified textile graphics and the V0 flame-retardant-classified plastic components meet important safety requirements for use at events.

Our PIXLIP GO frames are generally made of white ABSto guarantee perfect illumination inside.

The internal voltage of the frame is 24V DC.

PIXLIP GO Lightbox has a power consumption of approximately 27 W per square meter

The color temperature of our LEDs is 6500K. This allows us to guarantee extremely high color fidelity in your prints.

The luminous flux (lumens) of our PIXLIP GO LEDs is 2320 lm. This results in a luminous flux of approx. 2320 lm per square meter.

The CRI/Ra value of our GO LEDs amounts to 80.

Our PIXLIP GO LIGHTBOX always has a depth of 150 mm.

To determine the correct length of the profiles, take the width or height of the frame and subtract 100 mm for each profile. If you have a frame width of 1000 mm, you therefore need a 900 mm profile. For a height of 2500 mm, you need two 1150 mm profiles.