This package includes

Products Anzahl. Price

Details

Technische Daten
Product dimensions
Material
Aluminum

ABS plastic
Eigenschaften
Product type: Lightbox

Mounting: Dependent

Product range: PIXLIP EXPO

Dimmable: No

Assembly: Freestanding
What's in the box
12 × EXPO CUBE PROFILE

8 × EXPO CUBE CORNER

1 × EXPO CUBE LED 120W

1 × EXPO CUBE PLATE TOP

1 × EXPO CUBE PLATE BOTTOM

1 × EXPO CUBE PLATE DISTANCE HOLDER

1 × EXPO CABLE CONNECTOR FITTING

1 × EXPO CERAMIC LAMP HOLDER

4 × EXPO 2MM STEEL CABLE

8 × EXPO ZIP-CLIP 50KG

4 × EXPO EYE SCREW

1 × EXPO DEVICE PLUG EU

*prints depending on selection

FAQ

Do PIXLIP EXPO cube angles need to be screwed together?

The PIXLIP EXPO Cube angle and profiles are connected tool-free and simply by a plug-in connection. Stability is achieved later by the installation of the textiles. However, screws are included so that the cube can be repositioned or hung even without the textiles installed.

How much weight can the PIXLIP EXPO suspension set support?

The maximum tensile load of our PIXLIP EXPO cube suspension set is over 500 kg. This allows even large cubes to be created with just four suspension points.

Why does a PIXLIP EXPO Cube have a different LED than the EXPO Lightbox?

The structure of an EXPO Cube and an EXPO Lightbox is fundamentally different. While the LED modules of an EXPO Lightbox are inserted into the profile and must backlight up to two sides of the fabric, the EXPO Cube LED is suspended centrally within the cube and backlights up to five sides of the cube simultaneously.

Do you always need a suspension kit?

No, a suspension kit is always required if the cube itself is suspended from the ceiling; then the lower fabric can also be backlit. If the cube is standing on the floor, the KUBUS LED can also be placed on the floor.

0