SHOP

Mithilfe der PIXLIP GO T-Systemverbinder lassen sich zwei PIXLIP GO Lightboxen im 90 Grad Winkel zueinander an beliebiger Stelle verbinden. Schieben Sie hierfür lediglich die Schienen des T-Verbinders in die oberen Systemnuten der Rahmen und ziehen Sie die Rändelschrauben fest.

Mithilfe der flexiblen PIXLIP GO Systemverbinder lassen sich zwei PIXLIP GO Lightboxen in jedem Winkel zueinander verbinden. Stellen Sie hierfür lediglich beide Lightboxen nebeneinander und stecken Sie den Systemverbinder in die Systemnuten beider Rahmen.

The PIXLIP GO profiles are one of the main components of our PIXLIP GO lightboxes, along with corner connectors, braces and strut holders. The length of the profiles is dependent on the size of the lightboxes. To determine the correct...

Our PIXLIP GO LED profiles already come with an integrated LED module. This means that time-consuming LED assembly is no longer necessary and you can set up a PIXLIP GO Lightbox in just a few minutes. Thanks to the high...

You already have a 100100 GO Lightbox or a GO Counter L and would like to convert it to a GO Counter S? With this retrofit set you have the possibility to do so. The set consists of all the...

Do you already have a 100100 GO Lightbox or a GO Counter S and want to convert it to a GO Counter L? This retrofit kit allows you to do just that. The kit includes all the necessary panels. Installation...

You have two PIXLIP GO Lightboxes of the same height and would like to turn them into one continuous Lightbox? With the PIXLIP GO frame extension set you have the possibility to do so. This set contains all the components...

Our PIXLIP GO connecting rail can be used to ensure that two lightboxes are positioned perfectly next to each other without any gaps. This minimises the distance between the two textiles, making it much easier to plan continuous prints. As...

Thanks to our double-sided Pixlip GO base plates, a Pixlip GO lightbox can be set up freestanding in a room. Thanks to their precise fit, the base plates can be installed in seconds while still providing the frame with incredible...

Thanks to our double-sided Pixlip GO base plates, a Pixlip GO lightbox can be set up freestanding in a room. Thanks to their precise fit, the base plates can be installed in seconds while still providing the frame with incredible...

With the help of our PIXLIP GO Leds, normal PIXLIP GO profiles can be upgraded to PIXLIP GO LED profiles. Simply slide the LED into the groove provided in the profile. Thanks to the high radiance and colour rendering, your...

To ensure perfect illumination and maximum operational reliability with our PIXLIP GO lightboxes, large frames are equipped with up to three power supplies. If you want to position all power supplies in one location on the frame, you will need...

The PIXLIP GO connector set includes the most commonly used accessories for PIXLIP GO lightboxes. Our print clip simplifies mounting prints. Our TOP and STEP connectors allow you to connect multiple frames. Our cover caps prevent light from shining through...

Our PIXLIP EXPO profile has been designed to combine maximum stability with minimum assembly time. The length, cut and holes of the profiles can be completely customised. In addition, our profiles can be easily combined and extended with the help...

Our PIXLIP EXPO profile is designed to combine maximum stability with minimal setup time. The length, cut, and drilling of the profiles can be fully customized. Additionally, our profiles can be easily combined and extended with our long connectors. This...

Our PIXLIP EXPO LED modules can be installed into the PIXLIP EXPO profile completely tool-free and in seconds. Not only is the module freely positionable within the frame, it's also by far the brightest module in our range. This allows...

Our PIXLIP EXPO LEDs come with integrated power supplies as standard. This means that it is sufficient to wire the LEDs together so that the current can be passed from LED to LED. This is easily done with our PIXLIP...

Up to 19 additional LEDs can be connected to each PIXLIP EXPO LED, creating a continuous LED string. If your frame has more than 20 LEDs, or if you want to power multiple EXPO light boxes with one power connector,...

Up to 19 additional LEDs can be connected to each PIXLIP EXPO LED, creating a continuous LED string. If your frame has more than 20 LEDs, or if you want to power multiple EXPO light boxes with one power connector,...

Our PIXLIP EXPO base plates give free-standing EXPO lightboxes a secure hold. The connection is simply made via the system holes of the profiles. By using our tube connectors, you even have the possibility to realise a power supply through...

With our PIXLIP EXPO magnetic holders, even heavy objects can be mounted directly in front of the PIXLIP EXPO textile. The attachment is completely invisible to the viewer, making the objects appear as if they are floating in front of...

With the help of our PIXLIP EXPO mounting bolts even heavy objects can be mounted directly in front of the PIXLIP EXPO textile. The mounting is completely invisible to the viewer, so that it appears as if the objects are...