U/O Connector

Articlenumber 533000

With the help of our PIXLIP EXPO U/O connectors you can connect up to four PIXLIP EXPO lightboxes to a T or cross formation. The assembly is not only tool-free and possible in a few minutes, but also allows a cabling between the lightboxes.

533000

€256,00

Prices excl. VAT plus shipping costs

Available, delivery time: 1-3 days within Germany

Get advice now

Buy now & pay later with Billie Secure ordering process Fast shipping

Product-Highlights
Individual sizes Ideal for very large exhibition stands Aus hochwertigem Aluminium Quick assembly without tools

View all technical data

€256,00

Prices excl. VAT plus shipping costs

Thinking around the corner

With the help of our PIXLIP EXPO U/O connectors you can connect up to four PIXLIP EXPO lightboxes to a T or cross formation. The assembly is done without tools and in a few minutes. Nevertheless, the connection of the lightboxes is stable enough to do without base plates even for large lightboxes.

uncomplicated connection

If you want to put power from one EXPO Lightbox to the other, this is easily possible with our L as well as U/O connectors. Thanks to the intelligent design of our tube connectors and the compact format of our plugs, cables can be routed through the U/O connection.

Technical data

Product dimensions & weight Px U connection angle

Length: 200 mm

Width: 60 mm

Height: 185 mm

Product dimensions & weight U-add-on connection

Length: 185 mm

Width: 60 mm

Height: 55 mm

Product dimensions & weight Pipe connector

Length: 77 mm

Width: 28 mm

Height: 28 mm

Product dimensions & weight Px moer systeem

Length: 35 mm

Width: 35 mm

Height: 20 mm

Product dimensions & weight Kaaskopschroef

Length: 41 mm

Width: 55 mm

Height: 55 mm

Materials

PIXLIP EXPO U/O connectors are made of aluminum

PIXLIP EXPO pipe connectors are made of stainless steel

PIXLIP EXPO nuts are made of ABS

What is in the box

2x PIXLIP EXPO U-connector

2x PIXLIP EXPO O-connector extension

8x PIXLIP EXPO pipe connector

8x PIXLIP EXPO nut

Compatible with

PIXLIP EXPO Lightbox mit seitlichen Systembohrungen

FAQ

Do I necessarily need lateral system holes?

For the use of L and U/O connectors, lateral system holes are required, as this is where the connection is made. If your lightboxes do not have lateral system holes, it is possible to connect the frames using our connection brackets.

What is the advantage of L or U/O connectors over a 45° corner?

Our 45° corner solution enables continuous printing on the outer edge of the corner. However, the assembly effort for this is considerably higher. Since only the inside of the corner is visible at most trade show booths, a corner solution with L or U/O connectors is therefore the simpler solution in most cases.