Our PIXLIP GO system is perfect for small to medium-sized mobile exhibition stands thanks to 3 features in particular:
Due to the low weight and the very compact transport bags, entire exhibition stands can even be transported in cars.
Thanks to the plug-in mechanism of the light frames, assembly is completely tool-free and unrivalled in speed.
And with our PIXLIP GO configurator, exhibition stands can be put together online in seconds without any prior knowledge.
Our PIXLIP GO frames are always made of white ABS to guarantee perfect illumination on the inside.
The internal voltage of the frame is 24V DC.
PIXLIP GO Lightbox has a power consumption of approx. 27W per square metre
The light temperature of our LEDs is 6500k. This allows us to guarantee an extremely high colour fidelity of your prints.
The luminous flux (lumen) of our PIXLIP GO LEDs is 2320lm. This results in a luminous flux of approx. 2320lm per square metre.
The CRI/Ra value for our GO LEDs is 80.
Our PIXLIP GO lightbox always has a construction depth of 150mm.
To determine the correct length of the profiles, take the width or height of the frame and subtract 100mm per profile. If you have a frame width of 1000mm, you will need one 900mm profile. If the height is 2500mm, you will need two 1150mm profiles.