Our PIXLIP GO frames are always made of white ABS to guarantee perfect illumination on the inside.
For PIXLIP GO Lightboxes and PIXLIP COUNTER S, feet on both sides are included as standard. The floor must be level to ensure stability.
Exhibition stands are rented per square metre, which often results in an attempt to make optimal use of every square metre of the stand. Our standard double-sided feet are designed to give PIXLIP GO lightboxes sufficient stability even when standing freely in the room. However, as these feet thereby protrude 125mm on both sides, a Lightbox with double-sided feet cannot be placed directly against a wall or the outer edge of the exhibition stand, which can waste valuable space. For this purpose we have developed our single-sided PIXLIP GO feet.
Our one-sided PIXLIP GO feet were designed to place PIXLIP GO lightboxes with you directly in front of walls or on the edges of exhibition stands. This means that the lightbox is only supported on one side. If the lightbox should stand against a wall or be part of a fair wall in L or U shape, then a high stability is given. For free-standing positioning of the Lightbox in the room, we recommend our standard supplied feet on both sides.
PIXLIP GO feet are simply pushed into the PIXLIP GO system groove. This enables extremely fast assembly and a high degree of flexibility. For example, feet can also be mounted on the side of the frame to set it up rotated 90°.